~Marcella~ Swarovski Crystal Ring - wire wrapping tutorial by MyWiredImagination

This fantastic ring, named in honor of my Mother and based on my Swarovski Crystal Bracelet and Hoop earrings, is deceptively easy to make. With just a few tools, and a minimal amount of materials including a preset Swarovski Faceted Crystal, you can create a stunning ring; one guaranteed to turn heads and be noticed. This tutorial is an intermediate project; definitely not complicated, but you should at least be familiar with basic wire handling skills such as cleaning, straightening wire, turning a basic loop, and completing a basic binding wrap.

This tutorial is 21 pages with 83 detailed steps and 51 clear crisp photos - almost as good as having me there with you :)).

Tutorial includes full instructions to complete the band 2 ways. Look for more designs coming soon!!

The file size that will be sent to you is 2.54 MB.

Materials suggested:
►6 to 9 inches (15.2 to 22.9cm) 22ga. square wire ½ hard
►6 inches (15.2cm) 24ga. round wire dead soft, you can substitute 22 or 26ga round wire
☺612-15 inches (30.5 to 38.1cm) 20ga half-round wire, ½ hard
►6 4mm bicone crystals
►2 3mm smooth round beads
►5-12 2mm smooth round beads (depending on ring size)
►And of course, 1 preset Swarovski Crystal in a 4-hole setting, also known as a sew-on.
*You can alter the pattern and materials in this design, but it will alter the finished look and materials needed.
Tools needed:
►Ruler with mm, cleaning cloth, permanent marker(Sharpie)
►Flush cutters, flat-nose pliers, chain-nose pliers
►Ring mandrel, or even just a wooden dowel for shaping.
►Optional: round-nose pliers

►►►Complete kits with tutorial coming very soon!!◄◄◄

This is a PDF file - To view this tutorial you will need a copy of Adobes Acrobat Reader, which can be downloaded here:
http://www.adobe.com/products/acrobat/readstep2.html, however most computers with basic programming are already capable of reading a pdf file.

The tutorial with be sent within 6 to 12 hrs of receiving payment, in most cases MUCH, MUCH sooner; If you have several e-mail addresses, please specify which one you prefer I use, otherwise it will just be sent to the e-mail address listed in your PAYMENT information.

***~~~***~~~***PLEASE NOTE - if you have heavy spam catchers on your e-mail, please check the spam folder just in case***~~~***~~~***

I hope you enjoy making these pieces, please contact me with any questions you have about it. You may post pictures of the pieces YOU make with this tutorial, in any message boards, forums, or blogs you have, or are a part of, and credit where you learned this is appreciated.
You may make pieces for sale from this tutorial, but please dont MASS produce them - again credit where you learned the design is greatly appreciated.

However, PLEASE respect ownership of intellectual property, and DO NOT post the actual tutorial in forums, blogs and message boards; DO NOT mass produce, or share this tutorial in any form.


Thank you for visiting - please stop by again soon.....
Bobbi