ArtFire

Brilliant blue and deep mint green make a beautiful combination in this one of a kind, handmade glass cuff bracelet. The striped center cabochon sparkles in vibrant blue and bluegreen and is offset by coordinating bands of bubble-patterned dichroic glass in glittery mint green and blue.

This unique bracelet consists of three pieces of our own handmade fused glass which we've connected and embellished with non tarnish silver plated jewelry wire and finished with a silver plated toggle clasp. The dichroic glass in this bracelet has been capped with a layer of clear glass that protects the dichroic and adds visual depth.

Each piece of glass is a solid 1/4" thick and smooth on all edges. The center cabochon measures approximately 1" by 7/8" while the bands are 3/4" wide.

This cuff bracelet, which is intended to be worn loosely, falls into the "Average" size range and will comfortably fit wrists up to about 7-1/8".

If you're unsure of your wrist size, simply wrap a tape measure around your wrist at the wrist bone (don't pull it too tight) or use a piece of string or yarn and measure it flat on a ruler.

For comparison purposes, below are standard women's bracelet sizes:
Small = 6.5 inches
Average = 7 inches
Large = 7.5 to 8 inches
X-Large = 8.5+ inches

This piece has been signed and dated on the back.

If you're not familiar with fused glass, it's quite strong when properly fired and while this bracelet could break if dropped from a certain height onto a hard surface (like concrete) the glass will withstand a surprising amount of everyday wear.

We made this bracelet in our home-based glass studio near Dallas, Texas where we use high-quality, compatible glass made in the USA.

We hand cut the glass for each of our bracelets from larger glass sheets then stack the pieces and fuse them together at more than 1450° F using a digitally controlled kiln. Following the initial fusing cycle, we cold work many of our pieces to give them a uniform shape and appearance, then return them to the kiln to be fire polished. After fusing and fire polishing, we fire the glass once again, heating it to a point where it's just soft enough to conform to the shape of our bracelet mold. Each kiln-firing lasts from 11 to 14 hours as glass must be heated and cooled gradually (annealed) to maintain its integrity and prevent cracking.

Given the handmade nature of our wearable art pieces, while we can try to approximate a given design, we can never duplicate a piece exactly. We're also more inclined to create new designs rather than copying prior ones - especially in our dichroic glass items - so if you find a "must have" bracelet here in our studio, please don't hesitate to purchase it before someone else does. We may never make a piece quite like it again.

art glass, dichroic glass, non tarnish silver plated wire, silver plated toggle clasp, glass seed beads