VERIFIED MEMBER
This listing is for the instructions to make these pieces of jewelry - not the actual jewelry, materials or tools.
This is an advanced lesson, but even beginner/intermediate wire workers with a solid grasp of the basics can, with ''patience'' accomplish both designs.
This step-by-step tutorial shows you how to create a solitaire style prong ring AND how to convert the style into the Atom Pendant – 2 TUTORIALS IN ONE –
Materials suggested are for the ‘Lesson In Patience” ring – material requirements for the “Atom pendant” are covered at the beginning of the pendant section.
A ring size chart is included at the end of the tutorial.
Materials suggested for a size 8 ring:
13 inches 22 gauge square wire ½ hard
20 inches 20 gauge ½ round wire ½ hard
1 8mm round faceted stone
Tools needed:
Jewelers ruler (showing millimeters)
Sharpie marker
Chain nose pliers
Round nose pliers
Ring mandrel
Flush wire cutters
Adhesive putty or bubblegum
Diamond file or Dremel with polishing wheel
Penknife
Optional: Pin-vise
This ia PDF file - To view this tutorial you will need a free copy of Adobe''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s Acrobat Reader, which can be downloaded here:
http://www.adobe.com/products/acrobat/readstep2.html, however most computers with basic programming are already capable of reading a pdf file.
The tutorial with be sent within 6 to 12 hrs of receiving payment, in most cases much, much sooner; If you have several e-mail addresses, ie one for Artfire and/or one for Paypal, please specify in "notes to seller", which one you prefer I use, otherwise it will just be sent to the e-mail address listed in your PAYMENT information.
***~~~***~~~***PLEASE NOTE - if you have heavy spam catchers on your e-mail, please check the spam folder just in case***~~~***~~~***
I hope you enjoy making these rings and pendants, feel free to convo me with any questions you have about it. Feel free to post pictures of the pieces YOU make with this tutorial, in any message boards, forums, or blogs you have, or are a part of, and credit where you learned this would be appreciated.
However, PLEASE respect ownership of intellectual property, and DO NOT post the actual tutorial in forums, blogs and message boards; DO NOT mass produce, or share this tutorial in any form.
Thanks for stopping by my shop, please come back again soon - more tutorials for other great projects are in the works..................
~Bobbi
This is an advanced lesson, but even beginner/intermediate wire workers with a solid grasp of the basics can, with ''patience'' accomplish both designs.
This step-by-step tutorial shows you how to create a solitaire style prong ring AND how to convert the style into the Atom Pendant – 2 TUTORIALS IN ONE –
Materials suggested are for the ‘Lesson In Patience” ring – material requirements for the “Atom pendant” are covered at the beginning of the pendant section.
A ring size chart is included at the end of the tutorial.
Materials suggested for a size 8 ring:
13 inches 22 gauge square wire ½ hard
20 inches 20 gauge ½ round wire ½ hard
1 8mm round faceted stone
Tools needed:
Jewelers ruler (showing millimeters)
Sharpie marker
Chain nose pliers
Round nose pliers
Ring mandrel
Flush wire cutters
Adhesive putty or bubblegum
Diamond file or Dremel with polishing wheel
Penknife
Optional: Pin-vise
This ia PDF file - To view this tutorial you will need a free copy of Adobe''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s Acrobat Reader, which can be downloaded here:
http://www.adobe.com/products/acrobat/readstep2.html, however most computers with basic programming are already capable of reading a pdf file.
The tutorial with be sent within 6 to 12 hrs of receiving payment, in most cases much, much sooner; If you have several e-mail addresses, ie one for Artfire and/or one for Paypal, please specify in "notes to seller", which one you prefer I use, otherwise it will just be sent to the e-mail address listed in your PAYMENT information.
***~~~***~~~***PLEASE NOTE - if you have heavy spam catchers on your e-mail, please check the spam folder just in case***~~~***~~~***
I hope you enjoy making these rings and pendants, feel free to convo me with any questions you have about it. Feel free to post pictures of the pieces YOU make with this tutorial, in any message boards, forums, or blogs you have, or are a part of, and credit where you learned this would be appreciated.
However, PLEASE respect ownership of intellectual property, and DO NOT post the actual tutorial in forums, blogs and message boards; DO NOT mass produce, or share this tutorial in any form.
Thanks for stopping by my shop, please come back again soon - more tutorials for other great projects are in the works..................
~Bobbi
Flag This Item
Please indicate how this item is in violation of our TOS:
Please indicate how this item is in violation of our TOS:
ARTIFACTS RECEIVED:
Lesson In Patience Prong Ring and the Atom Pendant - Tutorial
http://static.artfire.com/admin/product_images/thumbs/afv--35716--3171_product_378788661_thumb_large.pngProduct Description:
$ 12.00
This listing is for the instructions to make these pieces of jewelry - not the actual jewelry, materials or tools.
This is an advanced lesson, but even beginner/intermediate wire workers with a solid grasp of the basics can, with ''patience'' accomplish both designs.
This step-by-step tutorial shows you how to create a solitaire style prong ring AND how to convert the style into the Atom Pendant – 2 TUTORIALS IN ONE –
Materials suggested are for the ‘Lesson In Patience” ring – material requirements for the “Atom pendant” are covered at the beginning of the pendant section.
A ring size chart is included at the end of the tutorial.
Materials suggested for a size 8 ring:
13 inches 22 gauge square wire ½ hard
20 inches 20 gauge ½ round wire ½ hard
1 8mm round faceted stone
Tools needed:
Jewelers ruler (showing millimeters)
Sharpie marker
Chain nose pliers
Round nose pliers
Ring mandrel
Flush wire cutters
Adhesive putty or bubblegum
Diamond file or Dremel with polishing wheel
Penknife
Optional: Pin-vise
This ia PDF file - To view this tutorial you will need a free copy of Adobe''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s Acrobat Reader, which can be downloaded here:
http://www.adobe.com/products/acrobat/readstep2.html, however most computers with basic programming are already capable of reading a pdf file.
The tutorial with be sent within 6 to 12 hrs of receiving payment, in most cases much, much sooner; If you have several e-mail addresses, ie one for Artfire and/or one for Paypal, please specify in "notes to seller", which one you prefer I use, otherwise it will just be sent to the e-mail address listed in your PAYMENT information.
***~~~***~~~***PLEASE NOTE - if you have heavy spam catchers on your e-mail, please check the spam folder just in case***~~~***~~~***
I hope you enjoy making these rings and pendants, feel free to convo me with any questions you have about it. Feel free to post pictures of the pieces YOU make with this tutorial, in any message boards, forums, or blogs you have, or are a part of, and credit where you learned this would be appreciated.
However, PLEASE respect ownership of intellectual property, and DO NOT post the actual tutorial in forums, blogs and message boards; DO NOT mass produce, or share this tutorial in any form.
Thanks for stopping by my shop, please come back again soon - more tutorials for other great projects are in the works..................
~Bobbi
This is an advanced lesson, but even beginner/intermediate wire workers with a solid grasp of the basics can, with ''patience'' accomplish both designs.
This step-by-step tutorial shows you how to create a solitaire style prong ring AND how to convert the style into the Atom Pendant – 2 TUTORIALS IN ONE –
Materials suggested are for the ‘Lesson In Patience” ring – material requirements for the “Atom pendant” are covered at the beginning of the pendant section.
A ring size chart is included at the end of the tutorial.
Materials suggested for a size 8 ring:
13 inches 22 gauge square wire ½ hard
20 inches 20 gauge ½ round wire ½ hard
1 8mm round faceted stone
Tools needed:
Jewelers ruler (showing millimeters)
Sharpie marker
Chain nose pliers
Round nose pliers
Ring mandrel
Flush wire cutters
Adhesive putty or bubblegum
Diamond file or Dremel with polishing wheel
Penknife
Optional: Pin-vise
This ia PDF file - To view this tutorial you will need a free copy of Adobe''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s Acrobat Reader, which can be downloaded here:
http://www.adobe.com/products/acrobat/readstep2.html, however most computers with basic programming are already capable of reading a pdf file.
The tutorial with be sent within 6 to 12 hrs of receiving payment, in most cases much, much sooner; If you have several e-mail addresses, ie one for Artfire and/or one for Paypal, please specify in "notes to seller", which one you prefer I use, otherwise it will just be sent to the e-mail address listed in your PAYMENT information.
***~~~***~~~***PLEASE NOTE - if you have heavy spam catchers on your e-mail, please check the spam folder just in case***~~~***~~~***
I hope you enjoy making these rings and pendants, feel free to convo me with any questions you have about it. Feel free to post pictures of the pieces YOU make with this tutorial, in any message boards, forums, or blogs you have, or are a part of, and credit where you learned this would be appreciated.
However, PLEASE respect ownership of intellectual property, and DO NOT post the actual tutorial in forums, blogs and message boards; DO NOT mass produce, or share this tutorial in any form.
Thanks for stopping by my shop, please come back again soon - more tutorials for other great projects are in the works..................
~Bobbi
Inspiration / Story behind this Product:
This is one of many designs I taught myself many , many years ago, when I was told "you can''''''''t do that" -
My answer - yes you can.....
Hours Invested: 120
Total Item Views 512
$12.00
Shipping:
All Other Countries $0.00
$0.00 if purchased with another item
Accepted Payment Methods:
Materials Used:
pdf file, tutorial, instructions, imagination, skill, experience, knowledge
Quick Bio:
Starving Jewelry Artist addicted to wire wrapping - Owned by 12 parrots, 2 dogs, and a cat....
I have been addicted to wire wrapping over 20 years - It is not just a living - It is my lif...
I have been addicted to wire wrapping over 20 years - It is not just a living - It is my lif...
Find Me Online At:
15 Items in MyWiredImagination's Studio | Visit Studio
Classic Style and Vintage Charm Ca... This is a wonderful dark, translucent Carnelian, skillfully wrapped in 14k GF - rolled gold - wire. The stone itself is 23mm long x 9mm wide, and wire wrapped in a wide style band to accent the stone's shape, and creates a wonderful sexy 'index fi...
$128.00
Ornate Double-Terminated Focal-Cla...
Wire Wrapped Ornate Double-Terminated Focal-Clasp with Variations by MyWiredImagination
This listing is for the instructions to make this piece of jewelry, not the actual pieces, materials, or tools.
This tutorial tea...
$12.00
Tutorial -Wire Wrapped Swarovski ...
Wire Wrapped Swarovski Bracelet Tutorial with Variations by MyWiredImagination
This listing is for the instructions to make this piece of jewelry, not the actual piece or the materials. This is intermediate level project, although I've had ...
$12.00
