VERIFIED MEMBER
Not pierced? Not a problem. 1/2" (12.5mm) copper hoop earring made specifically with the unpierced in mind.
A Brilliance Found classic, this little hoop earring is carefully designed to create the illusion of a pierced hole. It gently 'holds' onto your earlobe and can be worn in various locations on the ear. The edges have been filed for your comfort.
On this hoop, I've added standard 3mm copper beads (securely with a dap of glue) to represent the captive ball rings (CBR) that are common with piercings.
This listing is for a single 1/2" (12.5mm) hoop. Please specify which size you require. Small should be worn by those with thinner ears. Insertion gap is 1/8" (~3mm), but can be adjusted. Large suits those with thicker earlobes; insertion gap is 1/4" (~7.5mm). If you do not specify a size, Large will be provided.
Gently seperate the opening of the earring hoop until you are able to slide it onto your ear. Adjust. Once in position, carefully pinch the hoop just enough to hold onto the ear. Because this earring is so lightweight, it does not need to be very tight.
To remove, either gently pull apart or "rock" the earring hoop until it slides off.
Caution: Please do not over-tighten or over-loosen these hoops, as repeated bending may distort them. When worn properly, they should not irritate the ears. If irritation occurs, loosen your earring hoops by pulling gently to seperate further.
Special thanks to my model, Bimmy Gonzalis.
♥ To see the rest of the shop: http://www.artfire.com/modules.php?name=Shop&seller_id=41291
♥ Additional Information ♥
_________________________
♥ All jewelry from Brilliance Found arrives ready for gift-giving in a beautiful satin bag. Your jewelry comes complete with care instructions & it's name. Because really, it would be a tragedy to not have a name for art!
♥ Custom alterations welcome! If you like this item, but it's the wrong color/size/material, message me and we'll see what we can do!
♥ All Brilliance Found jewelry is guaranteed. Be sure to check out my shop policies for details: http://www.artfire.com/modules.php?
name=Shop&seller_id=41291&op=new&body=3
© 2009 Brilliance Found.
A Brilliance Found classic, this little hoop earring is carefully designed to create the illusion of a pierced hole. It gently 'holds' onto your earlobe and can be worn in various locations on the ear. The edges have been filed for your comfort.
On this hoop, I've added standard 3mm copper beads (securely with a dap of glue) to represent the captive ball rings (CBR) that are common with piercings.
This listing is for a single 1/2" (12.5mm) hoop. Please specify which size you require. Small should be worn by those with thinner ears. Insertion gap is 1/8" (~3mm), but can be adjusted. Large suits those with thicker earlobes; insertion gap is 1/4" (~7.5mm). If you do not specify a size, Large will be provided.
Gently seperate the opening of the earring hoop until you are able to slide it onto your ear. Adjust. Once in position, carefully pinch the hoop just enough to hold onto the ear. Because this earring is so lightweight, it does not need to be very tight.
To remove, either gently pull apart or "rock" the earring hoop until it slides off.
Caution: Please do not over-tighten or over-loosen these hoops, as repeated bending may distort them. When worn properly, they should not irritate the ears. If irritation occurs, loosen your earring hoops by pulling gently to seperate further.
Special thanks to my model, Bimmy Gonzalis.
♥ To see the rest of the shop: http://www.artfire.com/modules.php?name=Shop&seller_id=41291
♥ Additional Information ♥
_________________________
♥ All jewelry from Brilliance Found arrives ready for gift-giving in a beautiful satin bag. Your jewelry comes complete with care instructions & it's name. Because really, it would be a tragedy to not have a name for art!
♥ Custom alterations welcome! If you like this item, but it's the wrong color/size/material, message me and we'll see what we can do!
♥ All Brilliance Found jewelry is guaranteed. Be sure to check out my shop policies for details: http://www.artfire.com/modules.php?
name=Shop&seller_id=41291&op=new&body=3
© 2009 Brilliance Found.
Flag This Item
Please indicate how this item is in violation of our TOS:
Please indicate how this item is in violation of our TOS:
ARTIFACTS RECEIVED:
SINGLE Pierceless Copper Hoop with Bead
http://static.artfire.com/admin/product_images/thumbs/33839_product_1380112882_thumb_large.jpgBrillianceFound has provided 2 Photos For This Item: Click Below To View
Product Description:
$ 4.00
Not pierced? Not a problem. 1/2" (12.5mm) copper hoop earring made specifically with the unpierced in mind.
A Brilliance Found classic, this little hoop earring is carefully designed to create the illusion of a pierced hole. It gently 'holds' onto your earlobe and can be worn in various locations on the ear. The edges have been filed for your comfort.
On this hoop, I've added standard 3mm copper beads (securely with a dap of glue) to represent the captive ball rings (CBR) that are common with piercings.
This listing is for a single 1/2" (12.5mm) hoop. Please specify which size you require. Small should be worn by those with thinner ears. Insertion gap is 1/8" (~3mm), but can be adjusted. Large suits those with thicker earlobes; insertion gap is 1/4" (~7.5mm). If you do not specify a size, Large will be provided.
Gently seperate the opening of the earring hoop until you are able to slide it onto your ear. Adjust. Once in position, carefully pinch the hoop just enough to hold onto the ear. Because this earring is so lightweight, it does not need to be very tight.
To remove, either gently pull apart or "rock" the earring hoop until it slides off.
Caution: Please do not over-tighten or over-loosen these hoops, as repeated bending may distort them. When worn properly, they should not irritate the ears. If irritation occurs, loosen your earring hoops by pulling gently to seperate further.
Special thanks to my model, Bimmy Gonzalis.
♥ To see the rest of the shop: http://www.artfire.com/modules.php?name=Shop&seller_id=41291
♥ Additional Information ♥
_________________________
♥ All jewelry from Brilliance Found arrives ready for gift-giving in a beautiful satin bag. Your jewelry comes complete with care instructions & it's name. Because really, it would be a tragedy to not have a name for art!
♥ Custom alterations welcome! If you like this item, but it's the wrong color/size/material, message me and we'll see what we can do!
♥ All Brilliance Found jewelry is guaranteed. Be sure to check out my shop policies for details: http://www.artfire.com/modules.php?
name=Shop&seller_id=41291&op=new&body=3
© 2009 Brilliance Found.
A Brilliance Found classic, this little hoop earring is carefully designed to create the illusion of a pierced hole. It gently 'holds' onto your earlobe and can be worn in various locations on the ear. The edges have been filed for your comfort.
On this hoop, I've added standard 3mm copper beads (securely with a dap of glue) to represent the captive ball rings (CBR) that are common with piercings.
This listing is for a single 1/2" (12.5mm) hoop. Please specify which size you require. Small should be worn by those with thinner ears. Insertion gap is 1/8" (~3mm), but can be adjusted. Large suits those with thicker earlobes; insertion gap is 1/4" (~7.5mm). If you do not specify a size, Large will be provided.
Gently seperate the opening of the earring hoop until you are able to slide it onto your ear. Adjust. Once in position, carefully pinch the hoop just enough to hold onto the ear. Because this earring is so lightweight, it does not need to be very tight.
To remove, either gently pull apart or "rock" the earring hoop until it slides off.
Caution: Please do not over-tighten or over-loosen these hoops, as repeated bending may distort them. When worn properly, they should not irritate the ears. If irritation occurs, loosen your earring hoops by pulling gently to seperate further.
Special thanks to my model, Bimmy Gonzalis.
♥ To see the rest of the shop: http://www.artfire.com/modules.php?name=Shop&seller_id=41291
♥ Additional Information ♥
_________________________
♥ All jewelry from Brilliance Found arrives ready for gift-giving in a beautiful satin bag. Your jewelry comes complete with care instructions & it's name. Because really, it would be a tragedy to not have a name for art!
♥ Custom alterations welcome! If you like this item, but it's the wrong color/size/material, message me and we'll see what we can do!
♥ All Brilliance Found jewelry is guaranteed. Be sure to check out my shop policies for details: http://www.artfire.com/modules.php?
name=Shop&seller_id=41291&op=new&body=3
© 2009 Brilliance Found.
Inspiration / Story behind this Product:
For many years of my life, I lacked pierced ears. I understand all the traumas and tribulations of loving jewelry yet being unpierced.
At a young age, I developed a series of "fakies" -- real earrings that mimicked pierced earrings. I probably wore about half a million prototypes. Now, I have piercings, but I can still remember the early days.
So now, I share!
I guess this exposes my secret.
At a young age, I developed a series of "fakies" -- real earrings that mimicked pierced earrings. I probably wore about half a million prototypes. Now, I have piercings, but I can still remember the early days.
So now, I share!
I guess this exposes my secret.
More Info:
♥ All items ship from Canada within 2-6 days.
Arrival time: (approx)
WITHIN CANADA: 1-2 weeks
WITHIN US: 2-4 weeks
INTERNATIONAL: 1-4 weeks
Arrival time: (approx)
WITHIN CANADA: 1-2 weeks
WITHIN US: 2-4 weeks
INTERNATIONAL: 1-4 weeks
♥ Your purchase will arrive in a signature satin drawstring bag, ready for gift-giving!
♥ Satisfaction guaranteed! No-questions-asked returns. See shop profile for details: http://www.artfire.com/modules.php?name=Shop&seller_id=41291&op=new&body=3
♥ Alterations & custom work welcome!
http://www.BrillianceFound.com
Total Item Views 132
$4.00
Shipping:
All Other Countries $6.00
$1.00 if purchased with another item
Canada $4.00
$0.75 if purchased with another item
United States $4.00
$0.75 if purchased with another item
Australia $4.00
$0.75 if purchased with another item
Italy $12.00
$1.00 if purchased with another item
Accepted Payment Methods:
Also Accepts:
- Money Order
Materials Used:
Copper wire, 3mm copper bead, glue
Quick Bio:
♥ Join me in my exploration of life through metal, glass & wood. I love working with organic materials, and find inspiration in irregular textures and rich colors. I create in stages; it is rare...
Find Me Online At:
582 Items in BrillianceFound's Studio | Visit Studio
Silver Spoon Earrings on Gunmetal
Oh, aren't these charms just the cutest! They remind me of little spoons.
*Dark gunmetal leverback earring hooks
*Antique silver finish brass stampings
*Measure approx. 4.5cm (2") from top to bottom
This style is al...
$17.00
Heart of Ice - 16kt Gold on Sterli...
Vintage glass with a kick of new-age style. Stylised hearts are perfect for Valentine's day glamour!
*Opal glass drop dangles
*16kt goldplated heart base
*Sterling silver post
*Comes with clear rubber earnut stoppers
$32.00
Blue Crystal, Brass & Gold Earring...
On Sale! Was $19
Shoulder sweeping antique brass chain hangs freely from two tulip brass bead caps. To these little flowers, Ive added a simple length of wire & used antique copper crimp beads to secure a blue crystal rondelle for display.
$17.00
