BASIC MEMBER
This 17 page tutorial will teach you how to create a pendant that will easily slide onto any chain - even large omega chains. There are 21 steps with large color photos. Using basic metalsmithing techniques, a pendant will be formed from sterling silver with a gemstone bead accent using a telescoping rivet. (copper sheet can be substituted)
*NOTE* the tutorial will show you how to create the first pendant. The other two pieces are inspiration photos to show what you can do with telescoping rivets.
Materials:
• Metal sheet – 22 gauge (3” square)
• Metal tube bead
• 16 gauge half hard wire (4”)
• Gemstone (or glass) bead with a hole that will accept 16 gauge wire
The metal sizes are over what the project pendant uses. This will ensure you have enough to create the piece with a little extra for mistakes.
Tools needed:
• Files – large and needle, various sizes
• Sandpaper (medium to fine grit)
• Metal Shears, tin snips, or heavy duty scissors
• Hammer – ballpein or riveting
• Hammer - rawhide
• Drill and drill bit (drill bit corresponding to 16gauge wire)
• Ring clamp
• Nail (or center punch)
• Anvil or bench block
• Sharpie (or other brand marker)
• Ruler
• Calipers or wire gauge
• Painters tape
• Scrap metals ( 16 gauge or smaller pices stacked) (optional)
The tutorial will be emailed to you in PDF format. You will need to have adobe acrobat reader in order to open and view the tutorial. You can download a free version here:http://www.adobe.com/products/acrobat/readstep2.html
Tutorials will be sent out within 24 hours of payment being cleared. (most often much sooner than that though!)
As this is an electronic transfer of goods, all sales are final. If you encounter problems however, I will work with you to ensure a satisfactory outcome. So you can feel confident that you can overcome any difficulties or questions you may encounter, I am also available (within reason) to answer questions and mentor you whenever you purcahse a tutorial from me.
*NOTE* the tutorial will show you how to create the first pendant. The other two pieces are inspiration photos to show what you can do with telescoping rivets.
Materials:
• Metal sheet – 22 gauge (3” square)
• Metal tube bead
• 16 gauge half hard wire (4”)
• Gemstone (or glass) bead with a hole that will accept 16 gauge wire
The metal sizes are over what the project pendant uses. This will ensure you have enough to create the piece with a little extra for mistakes.
Tools needed:
• Files – large and needle, various sizes
• Sandpaper (medium to fine grit)
• Metal Shears, tin snips, or heavy duty scissors
• Hammer – ballpein or riveting
• Hammer - rawhide
• Drill and drill bit (drill bit corresponding to 16gauge wire)
• Ring clamp
• Nail (or center punch)
• Anvil or bench block
• Sharpie (or other brand marker)
• Ruler
• Calipers or wire gauge
• Painters tape
• Scrap metals ( 16 gauge or smaller pices stacked) (optional)
The tutorial will be emailed to you in PDF format. You will need to have adobe acrobat reader in order to open and view the tutorial. You can download a free version here:http://www.adobe.com/products/acrobat/readstep2.html
Tutorials will be sent out within 24 hours of payment being cleared. (most often much sooner than that though!)
As this is an electronic transfer of goods, all sales are final. If you encounter problems however, I will work with you to ensure a satisfactory outcome. So you can feel confident that you can overcome any difficulties or questions you may encounter, I am also available (within reason) to answer questions and mentor you whenever you purcahse a tutorial from me.
Flag This Item
Please indicate how this item is in violation of our TOS:
Please indicate how this item is in violation of our TOS:
Tutorial - Telescoping Rivet Pendant
http://static.artfire.com/admin/product_images/thumbs/afv--35724--4202_product_1173165918_thumb_large.jpgDoxalloDesigns has provided 4 Photos For This Item: Click Below To View
«
»
Product Description:
$ 10.00
This 17 page tutorial will teach you how to create a pendant that will easily slide onto any chain - even large omega chains. There are 21 steps with large color photos. Using basic metalsmithing techniques, a pendant will be formed from sterling silver with a gemstone bead accent using a telescoping rivet. (copper sheet can be substituted)
*NOTE* the tutorial will show you how to create the first pendant. The other two pieces are inspiration photos to show what you can do with telescoping rivets.
Materials:
• Metal sheet – 22 gauge (3” square)
• Metal tube bead
• 16 gauge half hard wire (4”)
• Gemstone (or glass) bead with a hole that will accept 16 gauge wire
The metal sizes are over what the project pendant uses. This will ensure you have enough to create the piece with a little extra for mistakes.
Tools needed:
• Files – large and needle, various sizes
• Sandpaper (medium to fine grit)
• Metal Shears, tin snips, or heavy duty scissors
• Hammer – ballpein or riveting
• Hammer - rawhide
• Drill and drill bit (drill bit corresponding to 16gauge wire)
• Ring clamp
• Nail (or center punch)
• Anvil or bench block
• Sharpie (or other brand marker)
• Ruler
• Calipers or wire gauge
• Painters tape
• Scrap metals ( 16 gauge or smaller pices stacked) (optional)
The tutorial will be emailed to you in PDF format. You will need to have adobe acrobat reader in order to open and view the tutorial. You can download a free version here:http://www.adobe.com/products/acrobat/readstep2.html
Tutorials will be sent out within 24 hours of payment being cleared. (most often much sooner than that though!)
As this is an electronic transfer of goods, all sales are final. If you encounter problems however, I will work with you to ensure a satisfactory outcome. So you can feel confident that you can overcome any difficulties or questions you may encounter, I am also available (within reason) to answer questions and mentor you whenever you purcahse a tutorial from me.
*NOTE* the tutorial will show you how to create the first pendant. The other two pieces are inspiration photos to show what you can do with telescoping rivets.
Materials:
• Metal sheet – 22 gauge (3” square)
• Metal tube bead
• 16 gauge half hard wire (4”)
• Gemstone (or glass) bead with a hole that will accept 16 gauge wire
The metal sizes are over what the project pendant uses. This will ensure you have enough to create the piece with a little extra for mistakes.
Tools needed:
• Files – large and needle, various sizes
• Sandpaper (medium to fine grit)
• Metal Shears, tin snips, or heavy duty scissors
• Hammer – ballpein or riveting
• Hammer - rawhide
• Drill and drill bit (drill bit corresponding to 16gauge wire)
• Ring clamp
• Nail (or center punch)
• Anvil or bench block
• Sharpie (or other brand marker)
• Ruler
• Calipers or wire gauge
• Painters tape
• Scrap metals ( 16 gauge or smaller pices stacked) (optional)
The tutorial will be emailed to you in PDF format. You will need to have adobe acrobat reader in order to open and view the tutorial. You can download a free version here:http://www.adobe.com/products/acrobat/readstep2.html
Tutorials will be sent out within 24 hours of payment being cleared. (most often much sooner than that though!)
As this is an electronic transfer of goods, all sales are final. If you encounter problems however, I will work with you to ensure a satisfactory outcome. So you can feel confident that you can overcome any difficulties or questions you may encounter, I am also available (within reason) to answer questions and mentor you whenever you purcahse a tutorial from me.
Inspiration / Story behind this Product:
A lot of people have asked how to create these rivets so I finally sat down and created a pendant, took all the photos, wrote it up, and now I have it available!
Total Item Views 230
$10.00
Shipping:
United States $0.00
$0.00 if purchased with another item
Accepted Payment Methods:
Materials Used:
tutorial, jewelry, sterling silver, gemstone bead, rivet
Quick Bio:
I am a primarily self taught metalsmith working in sterling and gold making mostly one of a kind pieces of jewelry...
Find Me Online At:
Similar Featured ArtFire Items:
14 Items in DoxalloDesigns's Studio | Visit Studio
SALE - Chunky Turquoise Ring
I created this ring with a man or woman in mind, but then went and sized it at a '6'! OOPS!
So this ring is either for a man of slim build or a woman.
A small round turquoise stone, with a great matrix, is hand set ...
$40.00
Lost in Space
Stunning Sterling and Topaz Ring
I created thing beautiful, one of a kind ring from sterling silver which I cut and formed by hand. A design was hand pierced on the base of the setting, to which the sterling dome was soldered. I tex...
$110.00
Sterling and Jade Ring
Catch this asteroid before it flies away!
A green jade stone is the focal of this 'asteroid' which was created from hand texturing sterling silver. The setting sits on a sterling band of half round wire for the ultimate in comfort....
$50.00
