BASIC MEMBER
This listing is for a 7-page PDF pattern with 11 pictures and row-for-row instructions on how to make both a little pony called Tony and a grumpy unicorn called Hubert. The two creatures partially share the same pattern.
Knitting Tony and Hubert involves only basic stitches. The knitting is done both flat and in the round, with the stitches knit, purl, increase and knit 2 together.
I use needles size 3.5 mm – US 4 – UK 9-10 for Tony and size 4 mm – US 5-6 – UK 8 for Hubert. With these Tony ends up about 12 cm (~5 in) and Hubert 15 cm (6 in) tall while sitting down (not counting the ears or horn). Exact size depends on the yarn and needles you use.
In addition to knitting needles you will need yarn suitable for your needles, stuffing and an embroidery needle.
The pattern will be sent to your email address within 24 hours of confirmed payment. The pattern is in PDF format, so you will need for example Adobe Reader to open it. Adobe Reader can be downloaded at:
http://www.adobe.com/products/acrobat/readstep2.html
If you have any questions about the pattern, feel free to send me an email.
This pattern is for personal and non-commercial use only. I sell the finished pony and unicorn in my shops, so understandably I wouldn't want to compete with my own design.
Jag kan översätta detta mönster till svenska vid behov.
Voin tarvittaessa kääntää tämän ohjeen suomeksi.
Knitting Tony and Hubert involves only basic stitches. The knitting is done both flat and in the round, with the stitches knit, purl, increase and knit 2 together.
I use needles size 3.5 mm – US 4 – UK 9-10 for Tony and size 4 mm – US 5-6 – UK 8 for Hubert. With these Tony ends up about 12 cm (~5 in) and Hubert 15 cm (6 in) tall while sitting down (not counting the ears or horn). Exact size depends on the yarn and needles you use.
In addition to knitting needles you will need yarn suitable for your needles, stuffing and an embroidery needle.
The pattern will be sent to your email address within 24 hours of confirmed payment. The pattern is in PDF format, so you will need for example Adobe Reader to open it. Adobe Reader can be downloaded at:
http://www.adobe.com/products/acrobat/readstep2.html
If you have any questions about the pattern, feel free to send me an email.
This pattern is for personal and non-commercial use only. I sell the finished pony and unicorn in my shops, so understandably I wouldn't want to compete with my own design.
Jag kan översätta detta mönster till svenska vid behov.
Voin tarvittaessa kääntää tämän ohjeen suomeksi.
Flag This Item
Please indicate how this item is in violation of our TOS:
Please indicate how this item is in violation of our TOS:
PDF Knitting Pattern - Hubert the Grumpy Unicorn & Tony the Lazy Pony
http://static.artfire.com/admin/product_images/thumbs/afv--35716--3602_product_908563523_thumb_large.jpgMorrgan has provided 4 Photos For This Item: Click Below To View
«
»
Product Description:
$ 4.50
This listing is for a 7-page PDF pattern with 11 pictures and row-for-row instructions on how to make both a little pony called Tony and a grumpy unicorn called Hubert. The two creatures partially share the same pattern.
Knitting Tony and Hubert involves only basic stitches. The knitting is done both flat and in the round, with the stitches knit, purl, increase and knit 2 together.
I use needles size 3.5 mm – US 4 – UK 9-10 for Tony and size 4 mm – US 5-6 – UK 8 for Hubert. With these Tony ends up about 12 cm (~5 in) and Hubert 15 cm (6 in) tall while sitting down (not counting the ears or horn). Exact size depends on the yarn and needles you use.
In addition to knitting needles you will need yarn suitable for your needles, stuffing and an embroidery needle.
The pattern will be sent to your email address within 24 hours of confirmed payment. The pattern is in PDF format, so you will need for example Adobe Reader to open it. Adobe Reader can be downloaded at:
http://www.adobe.com/products/acrobat/readstep2.html
If you have any questions about the pattern, feel free to send me an email.
This pattern is for personal and non-commercial use only. I sell the finished pony and unicorn in my shops, so understandably I wouldn't want to compete with my own design.
Jag kan översätta detta mönster till svenska vid behov.
Voin tarvittaessa kääntää tämän ohjeen suomeksi.
Knitting Tony and Hubert involves only basic stitches. The knitting is done both flat and in the round, with the stitches knit, purl, increase and knit 2 together.
I use needles size 3.5 mm – US 4 – UK 9-10 for Tony and size 4 mm – US 5-6 – UK 8 for Hubert. With these Tony ends up about 12 cm (~5 in) and Hubert 15 cm (6 in) tall while sitting down (not counting the ears or horn). Exact size depends on the yarn and needles you use.
In addition to knitting needles you will need yarn suitable for your needles, stuffing and an embroidery needle.
The pattern will be sent to your email address within 24 hours of confirmed payment. The pattern is in PDF format, so you will need for example Adobe Reader to open it. Adobe Reader can be downloaded at:
http://www.adobe.com/products/acrobat/readstep2.html
If you have any questions about the pattern, feel free to send me an email.
This pattern is for personal and non-commercial use only. I sell the finished pony and unicorn in my shops, so understandably I wouldn't want to compete with my own design.
Jag kan översätta detta mönster till svenska vid behov.
Voin tarvittaessa kääntää tämän ohjeen suomeksi.
Inspiration / Story behind this Product:
Hubert is a very grumpy little unicorn. Why? Well, mostly because he's a very pink teenage boy. And named Huuuubert. Tony on the other hand is a pretty happy, if a bit lazy pony.
Total Item Views 464
$4.50
Shipping:
Finland $0.00
$0.00 if purchased with another item
Accepted Payment Methods:
Materials Used:
pdf
Quick Bio:
Taught by my mother and grandmother, I've been knitting for as long as I can remember, as a way to relax and to set my imagination free. Recently I've also taken up crocheting, using both techniques t...
Find Me Online At:
Similar Featured ArtFire Items:
4 Items in Morrgan's Studio | Visit Studio
PDF Knitting Pattern - Hubert the ...
This listing is for a 7-page PDF pattern with 11 pictures and row-for-row instructions on how to make both a little pony called Tony and a grumpy unicorn called Hubert. The two creatures partially share the same pattern.
Knitting To...
$4.50
PDF Knitting/Crochet Pattern - Fer...
This listing is for a 6-page PDF pattern with 10 pictures and row-for-row instructions on how to make a cute raven called Ferdinand.
Making Ferdinand involves both knitting and little bit of crochet, but only basic stitches are used. Th...
$3.50
Horse Magnet - Black and Grey
This handsome horse would love to spend his time keeping your papers or cards in order. Hes made with a mix of knitting and crochet from grey and black cotton, and is about 7 cm (2 3/4 in) tall.
This horse contains a powerful neodym...
$9.00
