This item is in stock. It is the last of the colored extruders and available now ready for purchase and ready to be shipped to you.
This listing is for one TEAL xxl 18cm size czeXtruder. It has the T handle and can you can easily remove the magnetic handle and attach a drill immediately to the hex bit to that is connected to the threaded stem of the Czextruder top cap. This tool will withstand heavy duty professional use for polymer clay, metal clay, food products and we are finding other mediums. More to come in the future. Ideas are being mentioned everyday and test trials will be done. Watch for Demos on my blog and Lucy Clays. Also many wonderful ideas at the other distributor sites around the world. view www.czextruder.com to see many new tips/tecniques.
You will not be able to bend or hurt this extruder it is built to last and built to extrude for the beginner or the professional artist. It is produced in the Czech Republic by Lucy Clay the CzeXtruder company. They are in the process of making many tools.
Czextruder ~ What is it???
Czextruder is a multi media extruder. You can use it for Polymer Clay, Metal Clay, Food preparation, Cake decorating. (you cannot use the tool with food after using with clay, please purchase separate tools if using for food and clay).
The differences between the Czextruders in stock:
XL and XXL Czextruder T-handle version are Xl ~ 12cm Extruders & XXL ~ 19cm Extruder and are made of steel unlike other extuders made of aluminum or partial plastic. These extruders are professional quality. The extruder has a plunger inside that is removable and caps at both ends that are removable. They come with a hex bit end that attaches with a magnet to the included T- handle shown in the photos. The hex bit attached also attaches to any drill. In your purchase you get the Extruder/handle/extra o rings and a re-useable container.
XL & XXL Czextruder Crank Handle version are Xl ~ 12cm Extruders & XXL ~ 19cm Extruder and are made of steel unlike other extruders made of aluminum or partial plastic. These extruders are professional quality. The extruder has a plunger inside that is removable and caps at both ends that are removable. This version has a new cap that is a bit different that houses the jam nut when you extrude the jam nut goes inside the cap and that is when you stop. They come with a removable Hex Bit at the end and a Jam nut that threads up and down the threaded part of the tool and it is tightened below the Hex bit or your handle for stability. To drill you use the hex bit, to use with a tool you remove the hex bit and thread on the handle. It is a crank handle similar to most pasta machines. The handles are the main difference between the versions.
These tools are all easily used by anyone and parts are only supposed to be hand tightened. No need to over tighten to use it safely. The tool compresses air to extrude the plunger and clay inside. They are very easy to turn and use unlike most on the market. They are very durable and will last a lifetime if cared for properly. They are not recommended for children. Adult supervision is recommended. Lucy Clay tools and Kimberly Idalski of Kimi's Jewelry and Gifts are not liable for any injuries.
*****The LCDisks are separate. The professional versions on the market sell for $89.95 for an extruder and disks and are not steel. So you can purchase a Czextruder and 4 disks for less than the others on the market.
Purchase the Lucy Clay LCDisks here : http://www.artfire.com/ext/shop/studio/Kimis-Jewelry-From-The-Heart/0/0/0/lcdisks
**If you like the option of both handles, T- handle and crank handle with a drill bit as well. Then purchase the T- handle extruder and a handle conversion kit. You will have an all in one 3 way extruder only available in the USA. I will happily convert your extruder for you before shipping.
Please view my youtube videos and subscribe to follow for more information
There is also a Vise and a Vise base made by Lucy Clay tools and I highly recommend it if you do have problems with holding a tool or strength. This vise holds your extruder well. The Extruder screws into the vise and is in place securely. No slipping out when extruding like other vises on the market.
View my blog for more information posted Daily on the new tools, techniques and giveaways
Be sure to stop by and view our Facebook pages
If you have any questions please ask. I am always happy to help.
Thank you, Kimberly, USA Distributor of Lucy Clay Tools and CzeXtruder
* Shipping Explanation...included in the shipping area is Shipping from my home to yours ~ cheaper home shipping rate from USPS/customs fees that are applied to certain items as items originate from the Czech Republic and while traveling through customs sometimes fees are applied and are paid on delivery to me and then divided up between each item and myself, I pay a % and items tagged in other countries are added in a % in the shipping area (this cannot be stopped, sometimes it happens and sometimes it does not). Also in shipping is a .029% Paypal fee for each item as international company Lucy Clay Tools charges the fee and it is not a free service. So it is paid for by you in shipping. So in shipping is Shipping lowest possible rate/custom fees/Paypal fees. Please understand that I do NOT make a profit off of shipping. I do NOT charge for supplies for packaging. I ship priority mail with a free tracking number and pay for all supplies myself. The priority shipping is mandatory as we can then track our orders and be sure they are delivered safely.