Shoe Storage Lazy Susan | Floor to Ceiling | Free Ship!
Our LAZY SHOE-SAN, French Carousel inspired shoe storage, shoe organization "fit any height space" unit is a total shoe organization solution for showcasing your fashionable shoes in a time honored French tradition while keeping them stored, protected, and saving you valuable wall space. Works for Purses and Hand Bags as well.
Our Special Order Shoe Storage DUAL, 4 Tier Lazy Shoe-San's are both 180 degree rotating circular platform Storage Racks for Women's Shoes constructed in order to place one 4 tier on top of the other 4 tier ShoeSan. This is the largest maximum capacity shoe storage unit on the market today.
* French Carousel Design, rotating Lazy Shoe-San.
* Constructed with high density All Natural Wood for durability
* Great solution to free up much needed closet space.
Following are the Custom Designed dimensions example of a floor to ceiling height Shoe-San: You can modify the height specifications to fit your available space.
Suggested Tier cubicle heights:
Four Tier bottom unit...
Tier 1: 14" for boots
Tier 2: 9" for tennis shoes
Tier 3: 9" for sandals
Tier 4: 9" for low heels
Four Tier: placed on top of the above Four Tier unit:
Tier 5: 10" for high heels
Tier 6: 10" for high heels
Tier 7: 10" for extra high heels
Tier 8: 10" for stilettos
All the wood rounds in our Shoe_San's are a generous 28" in Diameter (measured straight across the round), and a very low profile 3/4" thick.
The entire combined Shoe_San shoe storage structure with two 24" diameter wood turntables, (each turntable, 1 1/2" thick) will be a minimum of 92" or approximately 7 feet 8 inches in height when combined as one unit placed on top of the other. Leaves approximately 4 inches of Safety Space between the top of the completed structure and an 8 foot ceiling using customers available space specifications of approximately 8 foot or less from floor to ceiling. The top cannot be used for storage space. We can adjust individual partition heights to match most floor to ceiling specifications, let us know the total height you need.
Each Tier has Six cubicles for your shoe storage. You can store up to two pairs of shoes per cubicle depending on the style and width of your shoes. Each cubicle will support two pair, size 10" women's shoe length; up to 96 pair per Shoe-San.
Customer can choose All Natural Wood (Stain/Paint Ready) or choose Stain Colors at Check-out.You will still be able to see the natural beauty of the grain after the stain application of choice is applied.
If you have a particular color preference other than the colors listed, let us know and we will try to accommodate your color of choice.
All the wood rounds used in our Shoe-San's are 28" in Diameter (measured straight across the round), and a very low profile 3/4" in thickness.In order to store two pairs per cubicle, the diameter of a round MUST BE 28" or greater, otherwise only one pair would fit or Six per Tier. Our Shoe_San will hold two pair or Twelve pair per Tier.
We use Pocket-Hole Joinery to construct the Shoe-San, this highly effective strong jointing technique, has its roots in ancient Egypt. Egyptians clamped two work-pieces together and bored a hole at an angle from the outside work-piece into the second work-piece to semi-hide the screws and create a extremely strong joint.
We add the best precision ball bearing (silicon lubricated) on the market today. Our bearing mechanism delivers a superb quiet and smooth operation and is attached to two, 24" x 24" diameter, 1 1/2" thick wood round turntable platform for stability, balance and ease of rotation, plus each of the metal anodized ball bearing mechanisms are rated at 1000 pounds weight capacity. Ball Bearings are Silicon lubricated to resist moisture and rust. Our unique Turntable systems results in a silky smooth 360 degree capability for instant access to any shoe on the Shoe-San.
This special project Shoe-San is a FULLY FINISHED product, 100% assembled, and then ALL tiers are dis-assembled for shipping. The customer can re-assemble ALL tiers by following our simple easy to follow assembly written instructions. The requirement is one Phillips Screwdriver, and 60 minutes to re-assemble both 4-Tier Shoe-San's, that's it!...Easy as Pie! Customer will need assistance to place the 4 Tier on Top of the other 4 Tier unit to complete the installation of the entire ShoeSan.
This Shoe-San, can weigh up to a total of 110 pounds. SHIPPING is 2-3 weeks ship date from date of order. We use FedEx, Home Delivery exclusively.
We have a up to 30 day parts replacement policy if the Shoe_San is damaged by the carrier in shipment. Make sure you inspect the shipment before signing for it when delivered to your home. If damaged, please take 6 pictures of the box and all visible damage to the Shoe-San from several angles and email to us via eBay. We will replace the damaged parts as quickly as possible.
Any questions, contact me before you purchase and I will get back to you ASAP.
Handmade in the USA by Woodworking Artisans in North Wales, PA
"If we don't make it, we don't sell it"
First Item: $0.00
Additional Items: $0.00
UniqueHomeDecorStuff has not yet received any comments from shoppers.